Solenoid control

Example of a customised version of a linear solenoid. A special feature is the plastic housing on the back to protect the electronics. Do you have a special requirement for a linear solenoid? Talk to us, we will find a solution.

Solenoid with cube plug and bellows on both sides. A special feature of this solenoid is the housing painted to automotive standards. Simply tell us the desired colour and the required paint structure and we will provide a professional paint finish.

Linear solenoid with angled plug. The moulded housing and the bellows on both sides prevent the ingress of dirt, which means that this linear solenoid can be used in unclean environments. The thread on the armature allows it to be attached to a lever mechanism or similar, for example.

Locking solenoid for door locking, for example. The robust bearing allows high lateral forces to be applied without deforming the inside of the locking solenoid and preventing it from moving. It can be mounted on the side of the housing or at the bottom via the mounting plate.

Solenoid in rectangular housing with side mounting options and mechanical emergency release. The bellows prevent the ingress of dirt.

Linear solenoid with cube plug. The bellows on both sides prevent the ingress of dirt, which means that this linear solenoid can also be operated in environments where there is a risk of dirt.

Vibrating solenoid in round housing with angled plug. This vibration solenoid is operated with 230VAC and vibrates at 50Hz. Different frequencies are possible, as are different vibration stroke lengths.

Lifting magnet designed as a frame magnet. It is attached via an internal thread on the long side. The thread on the armature allows connection to a lever mechanism, for example, so that the lifting magnet can be used as an actuating element.