Contact →

Flat gripper

A Flat gripper magnet is a permanent magnet that sits in a steel housing. This housing concentrates and strengthens the magnetic field so that the magnet generates particularly high holding forces on the open side. If the flat gripper is placed on a ferromagnetic surface, the magnetic circuit closes over the metal, causing the magnet to attract very firmly. Flat grippers are often used for holding, fixing or lifting metal parts, as they offer a high holding force in a compact design.

Note on our services

The content, projects and services presented on this website merely represent a selection of our work. They serve as examples and do not provide a complete overview of our range of services.

  • Flat gripper with Santoprene coating and threaded bush - round magnet with rubber protection for secure and scratch-free attachment.

    Flat gripper / pot magnet Santoprene overmoulded, with threaded bush on the back

    Special design of a NdFeB flat gripper with 2 or more poles and overmoulded with Santoprene.

  • Flat gripper with Santoprene coating and external thread - magnet with rubber protection for secure attachment without scratching.

    Flat gripper / pot magnet Santoprene overmoulded, with external threaded stud on the back.

    Special design of a NdFeB flat gripper with 2 or more poles and overmoulded with Santoprene.

  • Flat gripper with width across flats - cylindrical magnet with hexagonal mounting for secure assembly and fastening.

    Flat gripper/pot magnet - stainless steel, rubberised holding surface

    Special design of an NdFeB flat pot magnet with an internal thread on the back and a milled key width for mounting on a threaded stud. The depth effect is greater with this magnet system than with a classic flat gripper. The rubberised holding surface protects the magnet from damage on the one hand and prevents unsightly scratches on painted component surfaces on the other. The rubber coating also has a shock and vibration-damping effect.

  • Flat gripper with internal thread - round magnet with threaded hole for versatile fastening and assembly applications.

    Flat gripper / pot magnet with internal thread

    A flat gripper is a shielded magnetic system consisting of a metal pot with an inserted magnetic pill. The metal pot concentrates the magnetic field lines and thus increases the holding force of the inserted permanent magnet, enabling high holding forces to be achieved in a compact design. The permanent magnet is also protected against damage. Depending on the permanent magnet used, the operating temperature ranges from max. +80°C to max. +200°C.

  • Flat gripper with through hole - round magnet with hole for screw fastening in industry and trade.

    Flat gripper / pot magnet with through-hole

    A flat gripper is a shielded magnetic system consisting of a metal pot with an inserted magnetic pill. The metal pot concentrates the magnetic field lines and thus increases the holding force of the inserted permanent magnet, enabling high holding forces to be achieved in a compact design. The permanent magnet is also protected against damage. Depending on the permanent magnet used, the operating temperature ranges from max. +80°C to max. +200°C.

  • Flat gripper with external thread - round magnet with threaded bolt for secure fastening in industry and trade.

    Flat gripper / pot magnet with external thread

    A flat gripper is a shielded magnetic system consisting of a metal pot with an inserted magnetic pill. The metal pot concentrates the magnetic field lines and thus increases the holding force of the inserted permanent magnet, enabling high holding forces to be achieved in a compact design. The permanent magnet is also protected against damage. Depending on the permanent magnet used, the operating temperature ranges from max. +80°C to max. +200°C.

Load more

Electro holding magnets

Round electromagnet with star pole pitch

Round electromagnet with attached special pole plate. In this case, the special pole plate is designed with a star pole pitch.

Round electromagnet in standard version

round solenoid in 24VDC and in standard design.

Round electromagnet with standard pole shape and through-hole

round 24VDC electro holding magnet with through hole, e.g. to feed through an axis, or a push-off mechanism. A push-off mechanism, for example, can help to quickly detach thin, light and easily magnetisable metal parts from the magnet.

Rectangular electromagnet in standard pole shape with two outer poles and one inner pole

Rectangular solenoid in 24VDC with lateral cable outlet.

Electro holding solenoid rectangular with special pole shape

Rectangular solenoid in 24VDC in 2-pole design and sinusoidal special pole shape. One possible application would be the transport of particularly thin sheet metal parts.

Electro holding magnet with rounded holding surface as excavating magnet

The rounded holding surface makes this version of an electromagnet particularly suitable as a lifting magnet for magnetisable small parts such as screws or nails. Available in different diameters.

Electro holding magnet in rectangular design with 2-piece centre pole

Example of a customised version of a rectangular electromagnet. The two-part centre pole and the special casting are worth mentioning as special features. Do you have a special requirement for a holding magnet? Talk to us, we will find a solution.

Round electromagnet, designed as a ring magnet

Example of a customised version of a round electromagnet. The ring-shaped design should be mentioned as a special feature. Do you have a special requirement for a holding magnet? Talk to us, we will find a solution.